1.77 Inch SPI 128x160 ST7735 Driver Touch Screen
Product Specifications
| Product: |
1.77 Inch TFT Display |
Resolution: |
128x160 |
| Touch Screen: |
Optional |
Cover Glass Dimension: |
Customizable |
| Viewing Direction: |
12:00 |
Interface: |
SPI |
| Pin Number: |
14 Pins |
Connection: |
Soldering |
| Surface Luminance: |
200 Cd/m² |
LED Lifetime: |
40,000 Hours |
| Operating Temp.: |
-20°C To +70°C |
Storage Temp.: |
-30°C To +80°C |
Product Introduction
This is a 1.77-inch TFT color touch screen with a resolution of 128×160 pixels. It uses the ST7735S driver chip and communicates via SPI serial interface. It integrates resistive or capacitive touch panels and is specifically designed for miniaturization and low-power embedded scenarios.
Core Parameters
- Display size: 1.77 inches (effective display area approximately 28.03×35.04mm)
- Resolution: 128 (width) × 160 (height) pixels
- Driver chip: ST7735S (includes built-in display RAM, power and clock circuits)
- Communication interface: 3-wire / 4-wire SPI (up to 15MHz), compatible with 3.3V/5V master controller
- Touch type: Optional resistive (low cost) or capacitive (high sensitivity) touch screen
- Display color: 65K/262K true color (RGB565 format)
- Operating voltage: 2.6-3.3V (typical 2.8V), industrial-grade temperature range -20°C to +70°C
- Brightness / viewing angle: Standard 200-400cd/m², TN panel viewing angle approximately 120°
Main Features
- Compact and lightweight: Module thickness approximately 2.15-4.25mm, suitable for compact space integration
- SPI interface simplifies wiring: Only 4-5 control lines required, saving MCU pins and PCB area
- Low power consumption: Single power supply, no additional driver circuit needed, suitable for battery-powered devices
- High compatibility: Supports mainstream embedded platforms such as Arduino, STM32, and 51 microcontrollers, with abundant sample programs
- Anti-glare and ESD protection: Some models have anti-glare treatment on the surface, suitable for outdoor viewing; ESD protection up to 8KV
Main Applications
- Consumer electronics: Smart watches, bracelets, MP3/MP4 players, Bluetooth earphone charging cases display, small game consoles
- Industrial control: Portable instruments, sensor terminals, PLC operation panels, equipment status display, industrial remote controllers
- Medical equipment: Blood glucose meters, electrocardiogram monitors, portable ultrasound, small medical terminals
- Smart home: Smart switch panels, thermostats, doorbell displays, small household appliances (rice cookers, blenders) operation interfaces
- Vehicle and outdoor: Motorcycle/electric vehicle dashboards, GPS navigation, outdoor detectors, handheld terminals
- Education and makers: Arduino/Raspberry Pi development boards for learning, DIY electronic projects, course design demonstrations
Product Drawing
Our Services
- Free repair within one year after the shipment of products from us
- Replacement within 30 days after the shipment of products from us due to products' problems
- We can print your logo and stick your model number on the cameras
- We have long cooperation with many shipping companies and our export volume is large. The shipping companies can offer us good discounts
- Professional technician supports. We have a good after-sales service team. They can solve your problems in time
- All goods will be inspected and tested by our engineers and QC/QA before packing and shipment
- Customer satisfaction is most important to us. If you have any problem or questions regarding our transaction, please contact us by Email or online. It will be responded within 24 hours
- Products pictures only for your reference. Please kindly refer to the specification. We can provide the products based on the specification, or you can offer your own specification or drawing. We can customize all kinds of LCD displays for you
Frequently Asked Questions
1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?
No problem. Firstly, please kindly send us your specification/drawing paper. If you have not the specification, you can also provide your samples; we will recommend the suitable one if it is standard products. Or we can customize for you based on your own requirement.
2. This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
For the segment type LCD module, if you need modify the outline size or display content, a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type, can you make?
That's all right. We can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size of the LCD display, display information (Glass thickness, Polarizer, Display Type, Connector mode, Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment, we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Yes. Samples order is available.
7. What is the Leading Time?
If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for special ones, the leading time is about 15-30 days. Suppose we can finish earlier, we will report the information in advanced.
Votre message doit contenir entre 20 et 3 000 caractères!
