Product Features
Dimensions: Typical overall dimensions approximately 99.0mm × 96.6mm × 3.98mm with circular display area diameter of 87.6mm. Border width can be as narrow as 1.5mm with screen coverage ratio up to 82%.
Resolution: 800×800 resolution with high pixel density of 344PPI, providing clear, detailed display with smooth arc edges.
Color Performance: Supports 16.7M color display with NTSC 70% color gamut for precise, realistic color reproduction.
Touch Technology: Capacitive touch technology supporting multi-touch (5-point) with high sensitivity and fast response.
Driving Technology: Custom driving ICs with response time under 15ms, supporting smooth dynamic image display and 30% lower power consumption.
Optical Characteristics: Ring-shaped light guide plate design with brightness uniformity exceeding 85%. OGS full-lamination technology reduces reflection and improves outdoor visibility.
Interface Type: MIPI interface for high-speed data transmission with reduced pin count.
Frequently Asked Questions
I want the LCD display 8 digits and the outline size is 65x30x2.8mm?
No problem. Please send us your specification or drawing. If you don't have specifications, you can provide samples; we will recommend suitable standard products or customize based on your requirements.
This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
For segment type LCD modules, if you need to modify outline size or display content, a new LCD glass module is required. We will open new tooling for you.
This LCD display is HTN type, but I want STN type, can you make?
That's all right. We can change the display type according to your request.
I want to customize a new LCD module. Can you do?
Yes, we can. Please send your drawing. If you don't have one, please provide the outline size, display information (glass thickness, polarizer, display type, connector mode, storage temp, operating temp, supply voltage, viewing direction, drive condition), and we can customize for you.
What is leading time for tooling?
Generally, it takes 15 to 25 days after drawing confirmation and tooling charge payment. We will report the exact time when you confirm the drawing.
Can you send us samples for checking?
Yes, sample orders are available.
What is the Leading Time?
For standard products in stock, lead time is one day after payment. For mass production of special orders, lead time is about 15-30 days. If we can finish earlier, we will report the information in advance.
Your message must be between 20-3,000 characters!
