3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen for Industrial Instruments

1,000
MOQ
DISCUSSABLE
ราคา
3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen for Industrial Instruments
คุณสมบัติ คลังภาพ รายละเอียดสินค้า พูดคุยกันตอนนี้
คุณสมบัติ
ข้อมูลจำเพาะ
ขนาด: 107.23mm x 107.23mm x 9.73mm
แสดง: จอแสดงผล TFT LCD กลม
อุณหภูมิปฏิบัติการ: -20 ℃ ~ + 70 ℃
หน้าจอสัมผัส: ใช่
ประเภทหน้าจอ: TFT
ประเภทซัพพลายเออร์: โอเอ็ม
แผงสัมผัส: รองรับการปรับแต่ง CTP & RTP
ความสว่าง: 1,000 ซีดี/ตารางเมตร
เน้น:

3.6 Inch Round TFT LCD Display

,

1000 cd/m² Brightness Round TFT LCD Display

,

Touch Screen Round TFT LCD Display

ข้อมูลพื้นฐาน
สถานที่กำเนิด: จีน
ชื่อแบรนด์: BBI
ได้รับการรับรอง: ISO9001 RoHS
การชำระเงิน
รายละเอียดการบรรจุ: กล่องกระดาษ
เวลาการส่งมอบ: 3-4weeks
เงื่อนไขการชำระเงิน: t/t
สามารถในการผลิต: 100000/เดือน
รายละเอียดสินค้า
3.6 Inch Touch Sunlight Industrial Instrument 1000 Brightness Round LCD Display
Product Description
  • Product Name: Round TFT LCD
  • Mechanical Outline Size (W*H*T): 107.23*107.23*9.73
  • Size: 3.6 inches
  • IC/LCM Driver IC: ST72566
  • Lumens degrees: 1000cd/m²
  • Pixel Pitch (W*H): 0.165*0.165
  • Round Liquid Crystal Display
  • Round TFT LCD
  • Circular TFT LCD
  • High Brightness
  • Circular touch screen
Technical Parameters
Property Value
Product Name Circular TFT LCD
Product Type Round TFT Liquid Crystal Display
Drive Element TFT Active Matrix
Size 3.6 Inches
Active Area 83.49mm x 89.76mm
Operating Temperature -20°C to +70°C
Number of Pixels 544 x 506
Viewing Direction ALL O'CLOCK
Pixel Arrangement RGB Stripe
Mechanical Outline Size (W x H x T) 107.23mm x 107.23mm x 9.73mm
Pixel Pitch (W x H) 0.165mm x 0.165mm
3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen for Industrial Instruments 0 3.6 Inch 1000 cd/m² Brightness Round TFT LCD Display with Touch Screen for Industrial Instruments 1
The resolution is 544×506, using IPS full-view high-definition bright display technology. The operating temperature range is -30℃ to 85℃. The interface is RGB 24-bit. It is mainly applied in two-wheel vehicle instruments, industrial instrument displays, medical equipment, etc.
This type of display is mostly of industrial-grade capacitive/resistive touch type. For resistive touch, a dedicated touch pen (with a pen tip diameter of ≥ 1mm) must be used. Avoid using sharp objects (such as screwdrivers, fingernails) to directly click on it to prevent scratching the touch panel coating.
For capacitive touch screens, it is necessary to keep the screen surface clean. If there is any oil or dust, use a dust-free cloth dipped in industrial alcohol (with a concentration of 75% to 95%) to gently wipe it. Avoid using wet cloths or corrosive liquids (such as gasoline) for cleaning to prevent damage to the touch circuit.
The touch response has a certain delay (typically ≤ 100ms). Avoid rapid and consecutive clicks to prevent the accumulation of instructions, which could cause disorder in the instrument operation.
แนะนำผลิตภัณฑ์
ติดต่อกับพวกเรา
ผู้ติดต่อ : Jack
โทร : +8613711912723
แฟกซ์ : 86-769-81581872
อักขระที่เหลืออยู่(20/3000)